How to measure the thickness of PC endurance board How to measure the thickness of PC endurance board
2023 10/01
Apply professional measuring instruments such as micrometers and meters to accurately measure PC endurance boards. First, calibrate the caliper or meter gauge to the "0" position. Prepare to test the PC endurance board and remove the protective film from the upper edge of the board. Accurately measure the caliper, insert it horizontally into the PC board, gently press the caliper button, and observe the data on the record sheet caliper. Remember the above process and follow this method to remove two to three points on each of the four sides of the PC board. In total, at least 8 to 12 points must be accurately measured and recorded. The average of the obtained data from each point is the relative accurate thickness of the PC board, and then refer to the customized thickness of the furniture board for comparison. Calculate the thickness of the PC board by accurately measuring its net weight. Record the length, total width, and thickness of the PC board, and calculate the specific net weight of the PC board. The weighing method for PC board is: length * total width * thickness * 1.2=total weight of furniture board.