Experts from PC diffusion board manufacturers believe that users need to pay attention to some important matters when installing the board. Firstly, the board should be cut according to the actual size required, and special adhesive tape with strong adhesion should be used to seal the holes on the board, so that the fixed board is not prone to loosening. PC diffusion board company suggests that users should be careful when applying adhesive tape, not to dirty the surface of the board, and not to let the tape come into contact with dust or water. They should also ensure that the tape completely covers the hole, and the tape is harmless and will not affect the quality of the board.
Before installing the board, the user also needs to carefully check whether the tape is intact and undamaged. If there are any loose tapes, the user should replace them. Users should regularly maintain and maintain the board during its use, extend its lifespan, and save costs.
PC diffusion board manufacturers believe that users can use water with moderate temperature and low corrosive detergent to clean the board. They can use a soft cloth to slowly wipe the board, and cannot use rough, hard, or sharp tools to wipe the board. Users should wipe the board dry and not leave it in a wet state. Alcohol can help users remove oil stains, glue and other marks on the board. When transporting boards, they should be placed flat on the truck to reduce vibration and avoid damage during transportation, resulting in economic losses for users. The tape on the board can prevent wear and tear, but the service life of these tapes is not very long, and users need to replace them regularly.